Asian Test Equipments Ghaziabad, Uttar Pradesh

Rubber Testing Equipment

Rubber Hardness Tester

Rubber Hardness Tester

Approx. Rs 1.38 Lakh / Unit


Rubber Hardness Tester Asian Tester made a vertical plunger. The lower side of the plunger has an indenter. The lower shape of the indenter is ball type of specified dimension. The upper sides of the plunger have a good eclectic conductive tip. The weight of the plunger and fitting attached to it is a minor force. A big brass weight is the major force of the specified weight. A dial gauge is attached to the instrument for the measurement of the penetration depth of the indenter to the rubber. An electricity operated buzzer, for gently vibrating the apparatus to overcome the slight friction is mounted under the cover of the instrument. The tester is finished in NC based painting and bright chrome plating to give it a corrosion resistance finish.

Compression Testing Machine

Compression Testing Machine

Approx. Rs 80,000 / Unit


We are leading Manufacturer, exporter, and supplier of Compression Testing Machine. We design and develop all our machines using premium-grade raw material and components that are sourced from the reliable vendors of the market. The machine is equipped with facilities for hand pumping in case of power failure.

Specific Digital Gravity Balance

Specific Digital Gravity Balance

Approx. Rs 33,600 / Unit


ASIAN direct reading Specific Digital Gravity Balance provides a simple and quick mean to read directly the specific gravity of rubber and other elastomers. Thus reducing labor and eliminating calculations. The time taken to find out specific gravity of a sample is only about half a minute. The balance consists of a rigid scale with a specific gravity (SG) printed on standing vertically on a heavy base plate. To the center point at the scale, through jewel bearings to minimize the friction, a balancing arm is pivoted. At one end of the arm, two stainless steel pins are hanging with yarns. One of the pins is attached to glass jar kept on the base. A guard is provided to avoid accidental falling of the jar during use. At the other and of the balancing arm a pointer is fixed which indicates the specific gravity of materials under test. A sliding weight is also provided for initial balancing of the sample of different weight a leveling of the base plate. Two models of balance, one with a range of specific gravity between 0.9 to 3.0'' the second with a range of specific gravity / between 0.2to2.0 are available. A sample of any shape weighing between 5 and 12g can be tested in the first model, that weighing between 3 and 5g can be tested in the second model, and that weighing between 1and 2g can be tested in the third made. In the case of the second and third model, the lower pin is quite heavy and also acts as a sinker. Also in these models, the glass jar is kept on the base of a frame, which can be slid up and down on a rod fixed to the base plate to cover the full range at specific gravity.

Specifications:

Specific Gravity Balance

Specific Gravity Balance

Approx. Rs 33,600 / Unit


ASIAN direct reading Specific Gravity Balance provides a simple and quick mean to read directly the specific gravity of rubber and other elastomers. Thus reducing labor and eliminating calculations. The time taken to find out specific gravity of a sample is only about half a minute. The balance consists of a rigid scale with a specific gravity (SG) printed on standing vertically on a heavy base plate. To the center point at the scale, through jewel bearings to minimize the friction, a balancing arm is pivoted. At one end of the arm, two stainless steel pins are hanging with yarns. One of the pins is attached to glass jar kept on the base. A guard is provided to avoid accidental falling of the jar during use. At the other and of the balancing arm a pointer is fixed which indicates the specific gravity of materials under test. A sliding weight is also provided for initial balancing of the sample of different weight a leveling of the base plate. Two models of balance, one with the range of specific gravity between 0.9 to 3.0’’ the second with the range of specific gravity / between 0.2to2.0 are available. A sample of any shape weighing between 5 and 12g can be tested in the first model, that weigh between 3 and 5g can be tested in the second model, and that weighing between 1and 2g can be tested in the third made. In the case of the second and third model, the lower pin is quite heavy and also acts as a sinker. Also in these models, the glass jar is kept on the base of a frame, which can be slid up and down on a rod fixed to the base plate to cover the full range at specific gravity.

Specifications:

In the case of the model with range 0.9 to 3.0 SG scale is calibrated as under:

In the case of a model with range 0.2 to 2.0 SG scale is calibrated as under:

In the case of a model with range 0.05 to 0.7 SG scale is calibrated as under:
X
Provide Us More Details
Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for Rubber Testing Equipment ?

    country-ico

    We will contact you soon !

    Aslam Islam

    (CEO)

    Asian Test Equipments

    Mussoorie Gulawathi Road, Ghaziabad, Uttar Pradesh, India

    More Categories

    View All Categories »
    Send SMS
    Contact Us