Asian Test Equipments Ghaziabad, Uttar Pradesh

Plastic Testing Equipment

Hot Air Oven

Hot Air Oven
  • Hot Air Oven
  • Hot Air Oven

Approx. Rs 25,000 / Piece


Determination of effect of aging on various physical properties of different materials may be carried out by heating the material under test inside an air oven so that the effects of long term aging is reproduced within a much shorter duration of time .for this determination, physical properties of the material under test are determined before aging and aging the test specimen at the specified temperature for a set duration of time and subsequent to the room temperature before conducting the tests again. Determination of various physical characteristics of different materials and products at the elevated temperature may be carried out by heating the test specimen to the appropriate the temperature inside a constant temperature air oven and determining the required characteristics of the specimen kept at the same temperature. For this purpose, the equipment needed for conducting the determination can either be kept inside the oven along with the test specimen or if this is not feasible because of certain constraints, by taken the heated specimen out from the oven and conduction the test in the still air within the shortest possible span of time. The Asian hot air Oven has a test chamber of double walled construction. The inner walls are made of stainless steel sheet and outer walls of CRCA sheet. The space between the two walls is filled with mineral wool for insulation. The chamber is fitted with two adjustable perforated shelves for keeping the test specimen or the test equipment on. The oven is heated electrically with the help of heaters placed in ribs on the bottom and sides of the chamber. (An air circulating fan is provided on the back of the chamber for even temperature distribution) the temperature inside the test chamber is indicated and controlled by the digital temperature controller. The chamber is provided with two ports with adjustable openings for enabling natural change of air inside it by convection. These ports can also be used for providing electrical access to the test specimen kept inside the oven if so desired.

Additional Information:

Limited Oxygen Index Apparatus

Limited Oxygen Index Apparatus

Approx. Rs 78,600 / Piece


ASIAN Limited Oxygen Index Apparatus consists of a test chimney made of borosilicate glass suppurated by the metallic base and hook with the help of the metallic pillar. The mixture of nitrogen and oxygen is released from the bottom of the tube. The tube is filled with glass beads for mixing and evenly distributing the gas mixture. The specimen holder, which holds the test specimen, made of U shape and fixed at the center of the chimney. There is the porous screen mounted below the level of the specimen holder, to prevent falling combustion debris from fouling the gas entry and distribution paths. There is a digital temperature indicator cum controller with a thermocouple for the measurement. A copper tube with a suitable orifice for pilot flame is provided for igniting the specimen by inserting it from the top of the test column. The digital preset timer and buzzer are also mounted in the instrument. Two rotameter with needle valve is provided to control and measure oxygen and nitrogen flow in the test chimney. A timer for indicating the time of burning with a reset switch. The rotameter, temperature controller, timer are fitted in the sheet panel. The test chimney is fitted separately on the metallic platform. Gases, gas cylinders and its fittings are not provided with the equipment and have to be arranged by the purchaser.


Additional Information:

Melt Flow Index Apparatus

Melt Flow Index Apparatus

Approx. Rs 57,600 / Unit


Asian Melt Flow Index Apparatus for plastic measures the melt flow index of the plastic material. The system consists of a heated extruder tube, an interchangeable jet through which the material under test is extruded, and a piston with dead weights to apply the specified pressure on the material inside the extruder tube. The extruder tube is made from carbon steel and is heated by means of a Bend Heater, which surrounds its outer circumference. A PID controller is provided to indicate & control the temperature of the tube. The heater clogged with mineral wool insulation. The assembly is fixed on a rigid stand. The bottom of the tube is lagged with an insulation of PTFE to prevent sticking of the extrudate. The jet through with the extruder is pushed out is made from hardened and ground die steel. It is held at the bottom of the extruder tube. The piston made from silver steel relieved at the upper end is provided to push the extrudate out of the jet. The piston moves inside the cavity of the tube. A sleeve to provide to guide the relieved portion of the piston. The top of the piston carries a plate-form for keeping the load on. The plate-form is thermally insulated from the load. The extruder tube assembly is mounted on a metal box. A sheet metal control panel is mounted on the side of the equipment & houses the PID Controller, DIGITAL PRESET TIMER & other electronic components. Cleaning tools for tube cavity and jets & stoppers & cutter for the extrudate are also supplied with the equipment.

Laboratory Hot Air Oven

Laboratory Hot Air Oven

Approx. Rs 22,800 / Piece


The Asian hot air Oven has a test chamber of double walled construction. The inner walls are made of stainless steel sheet and outer walls of CRCA sheet. The space between the two walls is filled with mineral wool for insulation. The chamber is fitted with two adjustable perforated shelves for keeping the test specimen or the test equipment on.

Melt Flow Index Tester

Melt Flow Index Tester
  • Melt Flow Index Tester
  • Melt Flow Index Tester

Approx. Rs 57,600 / Set


Asian Melt Flow Index Tester for plastic measures the melt flow index of the plastic material. The system consists of a heated extruder tube, an interchangeable jet through which the material under test is extruded, and a piston with dead weights to apply the specified pressure on the material inside the extruder tube. The extruded tube is made from carbon steel and is heated by means of a Bend Heater, which surrounds its outer circumference. A PID controller is provided to indicate & control the temperature of the tube. The heater clogged with mineral wool insulation. The assembly is fixed on a rigid stand. The bottom of the tube is lagged with an insulation of PTFE to prevent sticking of the extrudate. The jet through with the extruder is pushed out is made from hardened and ground die steel. It is held at the bottom of the extruder tube. The piston made from silver steel relieved at the upper end is provided to push the extrudate out of the jet. The piston moves inside the cavity of the tube. A sleeve to provide to guide the relieved portion of the piston. The top of the piston carries a plate-form for keeping the load on. The plate-form is thermally insulated from the load. The extruder tube assembly is mounted on a metal box. A sheet metal control panel is mounted on the side of the equipment & houses the PID Controller, DIGITAL PRESET TIMER & other electronic components. Cleaning tools for tube cavity and jets & stoppers & cutter for the extrudate are also supplied with the equipment.

Melt Flow Indexer Testing Apparatus

Melt Flow Indexer Testing Apparatus

Approx. Rs 57,600 / Set


Asian Melt Flow Indexer Testing Apparatus (Melt Flow Index Tester) for plastic measures the melt flow index of the plastic material. The system consists of a heated extruder tube, an interchangeable jet through which the material under test is extruded, and a piston with dead weights to apply the specified pressure on the material inside the extruder tube. The extruder tube is made from carbon steel and is heated by means of a Bend Heater, which surrounds its outer circumference. A PID controller is provided to indicate & control the temperature of the tube. The heater clogged with mineral wool insulation. The assembly is fixed on a rigid stand. The bottom of the tube is lagged with an insulation of PTFE to prevent sticking of the extrudate. The jet through with the extruder is pushed out is made from hardened and ground die steel. It is held at the bottom of the extruder tube. The piston made from silver steel relieved at the upper end is provided to push the extrudate out of the jet. The piston moves inside the cavity of the tube. A sleeve to provide to guide the relieved portion of the piston. The top of the piston carries a plate-form for keeping the load on. The plate-form is thermally insulated from the load. The extruder tube assembly is mounted on a metal box. A sheet metal control panel is mounted on the side of the equipment & houses the PID Controller, DIGITAL PRESET TIMER & other electronic components. Cleaning tools for tube cavity and jets & stoppers & cutter for the extrudate are also supplied with the equipment.

Pendulum Impact Testing Machines

Pendulum Impact Testing Machines
  • Pendulum Impact Testing Machines
  • Pendulum Impact Testing Machines

Approx. Rs 70,800 / Unit


We are offering Pendulum Impact Testing Machines to our clients.

Specifications:


Additional Information:

Toxicity Chamber

Toxicity Chamber

Approx. Rs 1.55 Lakh / Piece


ASIAN Toxicity Chamber consists of an airtight enclosure of about 0.7m³ volume lined with opaque plastic sheeting having a hinged, fitted with a transparent plastic panel. Some gaseous products of combustion may react with or be absorbed by the walls of the chamber. So the inner wall has the lining of polypropylene and with polycarbonate, transparency window is provided. The chamber is fitted with a vacuum pump forced air extraction system, which can be closed at the exit from the chamber when required. The chamber is fitted with sampling positions such that the airtightness of the chamber is not impaired. The chamber is containing a mixing axial fan inside the chamber at horizontally and centrally inside the chamber at roof level to ensure rapid mixing of combustion products capable of being switched on and off externally. The burner is to be capable of achieving a flame approximately 100 mm in height. The burner is fitted at the center of the chamber. There is a provision is to be made for igniting and extinguishing the burner from outside the chamber. A digital temperature indicator is also mounted for the measurement of the temperature of the flame of the burner. The specimen support is an annulus cut from a sheet steel nominal thickness 2 mm of approximately 100 mm overall diameter with a 75 mm diameter hole carrying temperature resistance wires approximately 10 mm apart to form a lattice.
The complete assembly is equipped with a non-combustible side support arm to give a tennis racket appearance. This sample holder assembly has the provision of sliding of the sample without the leakage of the chamber. There are two flow meters are fitted to the instrument to fine control of the supply of natural gas and air. All the parts are either polished or painted to give the corrosion resistance long life. Gas detection tubes and its pumps are optional which will be supplied at the separate order as per customer requirement.

Laboratory Air Oven

Laboratory Air Oven

Approx. Rs 16,800 / Piece


We manufacture Laboratory Air Oven. The chamber is fitted with two adjustable perforated shelves for keeping the test specimen or the test equipment on.The oven is heated electrically with the help of heaters placed in ribs on the bottom and sides of the chamber.

Smoke Density Tester

Smoke Density Tester
  • Smoke Density Tester
  • Smoke Density Tester

Approx. Rs 1.11 Lakh / Unit


ASIAN Smoke Density Tester is constructed using 14 gauge aluminum box, which is hinged a heat resistant glass glazed door. This box is mounted on the base which houses the controls. Dependent upon the materials tested, the metal may require protection from corrosion. The chamber is sealed except for 25 by 30mm (1by 9in.) openings on the four sides of the bottom of the chamber. A liters/min specified capacity blower is mounted on one side of the chamber. The inlet duct to the bowler is equipped with a close fitting damper. The outlet of the bowler will be connected through a duct to the laboratory exhaust system. The two sides adjacent to the door are fitted with 70mm (2/3in) diameter smoke tight glazed areas entered 480mm (19/4 in.) above the base. At these locations and outside the chamber, boxes containing the optical equipment and additional controls are attached. A removable white plastic plate is attached to the back of the chamber. There is a clear area centered above the bottom of the chamber. Through which is seen an illuminated white on the red exit sign. The white background permits observations of the flame, smoke, and burning characteristics of the materials. The viewing of the exit sign helps to correlate visibility and measured values. The specimen holder is supported on a square gauge. Stainless steel wire cloth above the base and equidistant from all sides of the chamber. This screen is lying in a stainless steel bezel supported by a rod through the right side of the chamber. From the same rod similar bezel is located below and it supports a square of asbestos paper which catches any particles that may drip from the specimen during the test. By rotating the specimen holder rod, the burning specimen can be quenched in a shallow pan of water positioned below the specimen holder.
The specimen is ignited by a propane flame from a burner operating at a specified pressure. The fuel is mixed with air which has been propelled through the burner by the venturi effect of the propane as it passes through a small orifice. The burner is designed to provide adequate outside air. the burner is capable of being positioned quickly under the specimen so that the exit of the burner falls on a line passing through a point 8mm above the base at one corner of the chamber extending diagonally across the chamber and sloping upwards at 45 deg with the base. There is a control panel which controls and indicate the supply of gas. Lux of the light measurement system of the mounted light source also mounted in the instrument. There is a digital timer mounted in the instrument to indicate the time.

Specifications:


Additional Information:

Asian Heat Deflection Tester

Asian Heat Deflection Tester

Approx. Rs 78,000 / Unit


We are the manufacturer of the different type of Asian Heat Deflection Tester.

Heat Deflection Temperature Tester

Heat Deflection Temperature Tester
  • Heat Deflection Temperature Tester
  • Heat Deflection Temperature Tester

Approx. Rs 78,000 / Unit


The ASIAN Apparatus for Heat Deflection Temperature Tester consists of a specimen support, an immersion bath, a set of weights under deflection measuring device.The specimen support consists of a two parallel metal supports having rounded edges fixed at a specified distance on an aluminum frame. The load is applied on the test specimen midway between two supports. This block is fitted to the lower end of the vertical rod, which is guided inside a metallic sleeve and is constrained to move without rotating along a vertical axis. The upper end of the vertical rod carries a load carrying plate on which loading weight can be placed to load the test specimen. All the parts are made of aluminum having the same coefficient of linear expansion.The immersion bath consists of a double-walled reservoir having the inner walls made from Stainless Steel sheet and outer walls made of mild steel sheet. The space in between the walls is filled with glass wool insulation. The liquid in the bath is heated by means of an immersion heater and the rate of rising of temperature controlled with the help of an electronic voltage regulator. A digital temperature controller is provided to restrict the maximum temperature of the bath.The deflection of the specimen is measured with the help of dial gauge.

 

Specifications:

Laboratory Oven

Laboratory Oven

Determination of various physical characteristics of different materials and products at elevated temperature may be carried out by heating the test specimen to the appropriate temperature inside a constant temperature air oven and determining the required characteristics with the specimen kept under the same temperature.

Top Load Tester

Approx. Rs 89,000 / Piece


We are the leading and prominent Manufacturer and Exporter of Top Load Tester.

Smoke Visibility Tester

Smoke Visibility Tester

Approx. Rs 1.38 Lakh / Unit


Smoke Visibility Tester made of a plywood chamber inner side painted by heat proof paint the ceiling of the chamber have a hole which permits to hold light meter cell while testing. There is a hole in the bottom of the chamber, which is aligning to the ceiling hole. There is a clear glass bulb fitted to the bottom hole. The left-hand side of the chamber has a hole, an exhaust fan fitted to the left-hand side hole. The right-hand side has a hole which permits to flow air at the time of the exhaust of the smoke to the chamber. The front of the chamber has a hinged door, which has a clear glass window on the door. There are shutters on the left-hand side and the right-hand side hole of the chamber. The LUX of the bulb control with the help of an electronics regulator fitted in the panel of the instrument. The ceiling hole and the front glass window covered with the black curtain. The chamber fitted on the section stand. A LUX meter is supplied with the instrument for the measurement of the LUX of the light. There is an aluminum silicate and a stainless steel plate also supplied with the instrument. There is a stainless steel specimen frame tilted at 20?a to the vertical and have the provision to hold the specimen and there is provision to slide the specimen frame. There is a burner mounted on the bottom of the chamber at an angle of 45. A flow meter, pressure gauge and pressure regulator are fitted on the section frame for the adjustment of the supply of the gas. All the parts are painted or polished for the corrosion resistance long life. We will not supply any gas with the instrument.

Specifications:
X
Provide Us More Details
Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for Plastic Testing Equipment ?

    country-ico

    We will contact you soon !

    Aslam Islam

    (CEO)

    Asian Test Equipments

    Mussoorie Gulawathi Road, Ghaziabad, Uttar Pradesh, India

    More Categories

    View All Categories »
    Send SMS
    Contact Us