TrustSeal Verified

GST 09AAJFA0836D1ZR

New Items

Asian Universal Testing Machine

Asian Universal Testing Machine
  • Asian Universal Testing Machine
  • Asian Universal Testing Machine

Approx. Rs 5.47 Lakh / Piece


We are offering Asian Universal Testing Machine to the clients.


Additional Information:

Fabric Crockmeter

Fabric Crockmeter

Approx. Rs 50,000 / Piece


In order to determine the colorfastness of dyed or printed textiles or leather, this test is used for the determination ofcolor fastness against rubbing, either under dry or under wet conditions.

Water Absorption Tester

Water Absorption Tester

Approx. Rs 100 / Unit


as per IS:2925Used For Industrial Safety Helmets

Flammability Tester

Flammability Tester
  • Flammability Tester
  • Flammability Tester
  • Flammability Tester

Approx. Rs 1.07 Lakh / Piece


As per IS:9872 and ISO 6941

Additional Information:

Accessibility Probe

Accessibility Probe

Approx. Rs 15,000 / Piece


IS:9872, ISO 8124,EN 71

Additional Information:

Accessibility Probe

Accessibility Probe

Approx. Rs 20,000 / Piece


as per is:9873, ISO 8124, EN 71-1

Additional Information:

Sharp Edge Tester

Sharp Edge Tester
  • Sharp Edge Tester
  • Sharp Edge Tester
  • Sharp Edge Tester

Approx. Rs 45,000.00 / Piece


As per IS:9873,ISO:8124 an EN 71-1

Additional Information:

Durability Tester

Durability Tester
  • Durability Tester
  • Durability Tester

Approx. Rs 1.8 Lakh / Piece


as Per IS:9873 and ISO:8124

Zip Abrasion Tester

Zip Abrasion Tester

Approx. Rs 62,200 / Piece


We manufacture the Zip Abrasion Tester under load conditions.

Ball Resilience Tester

Ball Resilience Tester

Approx. Rs 44,400 / Unit


It is a kind of Ball Resilience Tester. The resilience of polyurethane foam is determined by dropping a metallic sphere on a slab of foam kept on a horizontal surface from a height of 500 mm and finding the height to which it rebounds after striking the surface of the foam. The Ball Resilience Tester for polyurethane foam consists of a flat horizontal platform, a vertical acrylic tube in which the sphere is dropped, and a hand operated arrangement to release the sphere from a pre-determined height. It has four leveling screws to make it horizontal. The acrylic tube is held over the base with the help of a holding block, which can be moved vertically to adjust the height of the tube to enable test specimens of different thicknesses which are to be tested. This adjustment is carried out with the help of a screw and due to this, the height of the tube can be set. The tube is held firmly after adjustment so that it does not rock during the test. The metallic sphere is kept in a circular opening in the metallic cover of the acrylic tube. It can be released by pressing a spring-loaded support, which is so designed as to release the sphere without imparting any initial linear or rotary movement to it. The equipment is finished in blue metallic painting.

Specifications:

Finish Film Adhesion Tester

Finish Film Adhesion Tester

Approx. Rs 7,200 / Unit


The "Asian" Finish Film Adhesion Tester made test specimen plates on which the test specimen is paste. There is a set of Pressing Jig on which the test specimen plates are the amount. A set of loading weight supply with the instrument. Made on the casted base plate. On which the supporting platform with loading knob is mounted. When press the loading knob the supporting platform will lift. The test specimen-pasting strip with test specimen mounted on the slot of the instrument & tight with the help of the tightening bolts. Slotted weights with hanger are also supplied with the instrument for applying the force to the test specimen is testing.

Specifications:

Crease Flex Tester

Crease Flex Tester
  • Crease Flex Tester
  • Crease Flex Tester

Approx. Rs 1.02 Lakh / Unit


The ability of a fabric to retain pressed in Crease Flex Tester and to recover from creasing is an important property, especially in a case of apparel fabrics. This properly is measured in terms of crease recovery angle, which is defined as the angle formed between the two limbs of a strip of fabric previously folded to form a single crease under prescribed conditions at a specified time after removed of creasing load.

Specifications:

Drape Meter

Drape Meter

Approx. Rs 33,000 / Piece


The ASIAN Drape Meter consists of a circular specimen support, an electric lamp to give off light, and an exposing and developing arrangement using light sensitive ammonia paper to determined the area covered by the shadow of the test specimen, and an electric lamp to expose the ammonia paper to determine the area covered by the shadow of the test specimen. The circular specimen support is made out cast aluminum and is fixed over a clear acrylic sheet. The sheet is hinged at one end and can be lifted for placing the ammonia paper for exposure. The paper is kept below the acrylic sheet on a resilient surface so that it is in close contact with the sheet when it is horizontal. The specimen holding and paper exposing arrangement are kept inside a sheet metal exposing chamber. The electric lamp is fitted at the upper end of the chamber so that light rays coming from it are intercepted by the test specimen. The rays which are not intercepted fall on the paper and expose it, thus giving a demarcation between exposed and unexposed areas. The chamber has a close fittings door. It has ventilation holes near its bottom and top for keeping it cool. An ammonia vapor developing chamber in which the exposed paper is kept for developing is provided below the exposing chamber. This chamber has a close fitting door and an arrangement to keep ammonium hydroxide to create a suitable atmosphere for developing the print. The test specimen is kept over a welded wire mesh platform to ensure a uniform developing. The outside of the apparatus is finished in dark admiralty gray synthetic enamel to give it a corrosion resistant finish. A metal template of 250 mm diameter have a central hole for marking and cutting the test specimens, a specimen pressing a disc, one hundred sheets of ammonia process paper, and one bottle of ammonium hydroxide are supplied as standard accessories.

Technical Specification:

Additional Information:

Digital Flexometer

Digital Flexometer
  • Digital Flexometer
  • Digital Flexometer

Approx. Rs 75,000 / Unit


Flexometer is used for the assessment of the flexing endurance of light leathers and their surface finishes. The ability of light leathers such as those used in shoe uppers, gloves and garments to withstand repeated flexing without cracking can be accurately determined with ASIAN Flexometer. This testing equipment is built on a rigid metallic base plate. The test specimen is held between a pair of stationary and oscillating grips. The grips are specially designed to enable quick fixing and removal of the test specimen and are shaped to meet the specifications.
A six digit even electronic counter with key reset and backup memory is provided to count the total number of flexing cycles undergone by the test specimens. The equipment is able to carry out a number of flex cycles per test.

Features:

Additional Information:

Bench Thickness Gauge

Bench Thickness Gauge
  • Bench Thickness Gauge
  • Bench Thickness Gauge

Approx. Rs 42,000 / Piece


as per IS:9873, ISO:8124,EN 71-1

Additional Information:

Mechanical Force Gauges

Mechanical Force Gauges

Approx. Rs 20,000 / Piece


as per IS:9873 ans ISO 8124

Flexometer

Flexometer
  • Flexometer
  • Flexometer

Approx. Rs 78,000 / Piece


As per IS 5914

Additional Information:

Push Pull Gauge

Push Pull Gauge

Approx. Rs 100 / Piece


Used for toys testing

COBB Tester

COBB Tester
  • COBB Tester
  • COBB Tester

Approx. Rs 13,500 / Unit


ASIAN Cobb Tester is used for the Cobb resistance of the paper. It consists of a brass (or gun metal) cylinder of known inside diameter and length. It has a metallic plate, which is used for clamping the one side of the cylinder with the help of bracket and bolts. The metallic plate, which is used for clamping purpose, pastes a rubber sheet for the perfect clamping. The whole assembly of the cylinder and clamping arrangement is pivoted so that easy and fast pour off the water takes place. A brass roller of specified size and shape is also provided with the instrument. The equipment is designed to give a long and trouble-free life; the components are bright polished and bright chrome plated.

Specifications:

Additional Information:

GSM Balance

GSM Balance

Approx. Rs 13,500 / piece


Asian Quadrant Scale for GSM Balance is a simple and quick device which directly indicates the weight per unit area in grams per square meter (GSM) on a sector scale when a sample of selected size is suspended from a clamp fixed to the pointer arm. GSM Balance measures the GSM of fabric, paper, flooring, PVC film and other flexible sheet material. The system is supplied with two templates. The ASIAN GSM Balance is designed to give the weight per unit area of textile fabrics directly. It consists of a quadrant scale calibrated in values of GSM fixed in a vertical plane on a rigid base having provision for leveling. A pointer beam is pivoted on two jewel bearings at the center point of the scale. A specimen of specified area is cut out from the fabric with the help of either of the two templates provided (or by round cutter) and is suspended on one end of the pointer beam. The weight per unit area is read directly from the quadrant scale.

TECHNICAL SPECIFICATION

Additional Information:

GSM Balance

GSM Balance

Approx. Rs 26,400 / Unit


Asian Quadrant Scale for GSM Balance is a simple and quick device which directly indicates the weight per unit area in grams per square meter (GSM) on a sector scale when a sample of selected size is suspended from a clamp fixed to the pointer arm. GSM Balance measures the GSM of fabric, paper, flooring, PVC film and other flexible sheet material. The system is supplied with two templates. The ASIAN GSM Balance is designed to give the weight per unit area of textile fabrics directly. It consists of a quadrant scale calibrated in values of GSM fixed in a vertical plane on a rigid base having provision for leveling. A pointer beam is pivoted on two jewel bearings at the center point of the scale. A specimen of specified area is cut out from the fabric with the help of either of the two templates provided (or by round cutter) and is suspended on one end of the pointer beam. The weight per unit area is read directly from the quadrant scale.



Additional Information:

Wrap Reel

Wrap Reel

Approx. Rs 38,500 / Unit


Wrap Reel is offered in both motor or hand operated models. Metric and imperial models are available. The system is used for making the lead, used for yarn strength, count measurement, and length measurement. The yarn is spread uniformly in a band of 20mm as the lead is formed. Up to 5 legs can be formed at one time. One of the arms of the reel can be docked to facilitate the removal of the lead from the reel. The number of turns is indicated on a counter. In the case of motor operated wrap reel, a fractional horsepower motor controlled by a pre-set digital counter is provided to give the movement to the reel. An electromagnetic brake is provided to stop the movement of the reel almost instantaneously to reduce the chances of over travel. The wrap reel is mounted over a fabricated thick steel sheet base plate. Bobbins of up to 100 mm diameter and 250 mm length can be mounted on the base plate. The yarn taken up from the bobbins is guided over a hook and is spread uniformly with the help of pigtail yarn guides. The guides move through a distance of 20 mm once very sixteen turns to give a lead of 20 mm width. The standard wrap reel is suitable for making either imperial or metric leads composite wrap reel which can make either of the two types of the lead with the help of an additional reel is also available. Reel of another swift perimeter can also be supplied against specific requirements.

Vibration Table

Vibration Table

Approx. Rs 3.8 Lakh / Unit


The transport packages in all distribution system are subjected to varying intensities of Vibration Table. Vibration Test is carried out to assess the performance of a filled package or furniture in terms of its strength or protection that it offers to its contents when subjected to vibration. This test method simulates the transport hazards, to produce an equivalent effect or damage during the test.The equipment is suitable for testing containers of any form, material, kind, design with interior packing, means of closure and any size and weight.

Gloss Meter

Gloss Meter

Approx. Rs 25,000 / Unit


We are highly engaged in offering the Gloss Meter to our clients.

Pull Testers

Pull Testers

Approx. Rs 86,400 / Piece


Specifications:

Beaker Dyeing Machine

Beaker Dyeing Machine

Approx. Rs 78,000 / Unit


ASIAN Atmospheric Pressure Beaker Dyeing Machine is used for high-temperature dyeing of fabric and yarn. This machine is used for sample dyeing of Yarn/Fabrics at a max temperature of 98° C. The machine is a model.
The equipment is basically a doubled walled stainless steel tank. The inside/ outside tank are of SS 304 Grade sheet & jars are of SS 304 Grade. A motor & a cam – assembly are provided to give to & fro movement to SS rods to which yarn or fabric samples are tied.

Models are available on request:

Specifications:

Laundrometer

Laundrometer
  • Laundrometer
  • Laundrometer

Approx. Rs 1.09 Lakh / Set


The "ASIAN" Laundrometer consists of a digitally controlled, electrically heated double walled water bath. The inside walls of the bath are made of Al Stainless steel the outside walls are made of mild CRCA sheet duly enameled. The bath is heated by means of heaters. The temperature controller controls the temperature of the water inside the bath. The temperature is indicated on a digital indicator. The bath has a double walled hinged lit made of stainless steel sheet. The jars, in which the test solution and specimens are kept during the test, are made from stainless steel. Moreover, they are provided with rubber seals for watertight closing. They are held in a stainless steel rotor assembly mounted on a stainless steel shaft at the center of the bath and rotating about a horizontal axis with the help of an electric motor and worm reduction gear box.A clockwise time is also provided to stop the motor after any pre-determined time. The apparatus is fabricated on an iron frame and is completely enclosed on all four sides with mild sheet duly enameled in dark gray hammer tone painting. The top of the apparatus is covered with stainless steel sheet. One hundred stainless steel balls of 6mm diameter are supplied with the apparatus as a standard accessory for providing beating action during the washing operation, extra steel balls and standard gray scales are available as optional accessory.A built-in preheating bath for pre-heating the test solution is also offered as an optional accessory, this bath is mounted in the same form with provision to keep the jars in place. This bath also has double walled construction, with the inner chamber made of aluminum sheet, the outer chamber made of mild steel sheet, and mineral wool insulation between the town walls. The bath is heated the help of an electric immersion heater and its temperature controlled by a capillary type thermostat. These baths also have a double walled tip of stainless steel sheet.

TECHNICAL SPECIFICATION

Launderometer

Launderometer

Approx. Rs 95,000 / Unit


The “ASIAN” Launderometer consists of a digitally controlled, electrically heated double walled water bath. The inside walls of the bath are made of Al Stainless steel the outside walls are made of mild CRCA sheet duly enameled. The bath is heated by means of heaters. The temperature controller controls the temperature of the water inside the bath. The temperature is indicated on a digital indicator. The bath has a double walled hinged lit made of stainless steel sheet. The jars, in which the test solution and specimens are kept during the test, are made from stainless steel. Moreover, they are provided with rubber seals for watertight closing. They are held in a stainless steel rotor assembly mounted on a stainless steel shaft at the center of the bath and rotating about a horizontal axis with the help of an electric motor and worm reduction gear box.A clockwise time is also provided to stop the motor after any pre-determined time. The apparatus is fabricated on an iron frame and is completely enclosed on all four sides with mild sheet duly enameled in dark gray hammer tone painting. The top of the apparatus is covered with stainless steel sheet. One hundred stainless steel balls of 6mm diameter are supplied with the apparatus as a standard accessory for providing beating action during the washing operation, extra steel balls and standard gray scales are available as optional accessory.A built-in preheating bath for pre-heating the test solution is also offered as an optional accessory, this bath is mounted in the same form with provision to keep the jars in place. This bath also has double walled construction, with the inner chamber made of aluminum sheet, the outer chamber made of mild steel sheet, and mineral wool insulation between the town walls. The bath is heated the help of an electric immersion heater and its temperature controlled by a capillary type thermostat. These baths also have a double walled tip of stainless steel sheet.
X
Provide Us More Details
Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for New Items ?

    country-ico

    We will contact you soon !

    Aslam Islam

    (CEO)

    Asian Test Equipments

    Mussoorie Gulawathi Road, Ghaziabad, Uttar Pradesh, India

    More Categories

    View All Categories »
    Send SMS
    Get Callback