Asian Test Equipments Ghaziabad, Uttar Pradesh

Fabric Testing Equipment

Elemdrorf Tearing Strength Tester

Elemdrorf Tearing Strength Tester
  • Elemdrorf Tearing Strength Tester
  • Elemdrorf Tearing Strength Tester

Approx. Rs 60,000 / Unit


The “ASIAN” Elmendorf Tear Tester consists of a brass sector pendulum pivoted on anti-friction ball bearings over a vertical bracket fixed on a rigid metallic base. The test specimen, in shape of a rectangular, is held between two clamps, one of which is mounted on a pendulum and the other is mounted on the vertical bracket. The clamps are mounted in such a manner that their holding faces are aligned with each other when the pendulum is released by lifting a release lever the action cause the pendulum to fall down under its weight & to tear the test specimen while doing so. Th energy absorbed during tearing is indicated on a scale fitted on pendulum by a low friction pointer pivoted on the axis of the pendulum. An adjustable knife is also mounted on the pendulum upper bracket is centered between the two clamps & is used for making the initial slit in the test specimen. A check weight is supplied with the tester for verification of the scale. The instruments are finished is metallic painting and bright chrome plating to give it a corrosion resistant finish.

Additional Information:

Pilling Tester

Pilling Tester
  • Pilling Tester
  • Pilling Tester
  • Pilling Tester

Approx. Rs 64,400 / Unit


Test the filling of the textile fabrics supplied with the template, 8 rubber tubes, and jig/fixture. Two box and four box models are available. The “ASIAN” Pilling Tester consists of two cubical boxes inner walls of the box are lined with 3mm thick cork sheet. The boxes are rotated by means of the motor about the horizontal axis. A pre-set digital counter is provided for stopping the tester after a pre-determined number of revolutions. A template, metal cylinder, comprising Jig and 8-rubber tube are provided with the instrument. The instrument is finished by bright chromes plating & metallic painting for corrosion resistant finish.

Specification

Additional Information:

UV Chamber

UV Chamber
  • UV Chamber
  • UV Chamber
  • UV Chamber

Approx. Rs 3.4 Lakh / Piece


TECHNICAL DATA:

 

RELATED STANDARD:

 

ASTM G53, ASTM D4329, ASTM D5208, ISO 4892 IS 14887 : 2000 and meets other relevant National and International test standards


Additional Information:

Colour Matching Cabinet

Colour Matching Cabinet

Approx. Rs 22,800 / Piece


The “ASIAN” Colour Matching Cabinet provides standardized and environment for visual assessment of color. It is suitable for all applications where is a need to maintain color consistency and quality. It allows a person to evaluate color sample under different light sources, artificial daylight, filament light, ultra violet light and tube light TL 84 (tri-phosphor fluorescent light). The use of multiple light sources is the only way to detect metamerism when samples appear to match less than one light source is the only way to distinctly different under another. Color matching is the universally preferred choice for faster, closer and accurate color matching of samples.

Martandle Abrasion Tester

Martandle Abrasion Tester
  • Martandle Abrasion Tester
  • Martandle Abrasion Tester

Approx. Rs 1.13 Lakh / Piece


The Asian Martandle Abrasion Tester for zipping made on a created even base plate. There is a course of action for holding the test of zipping evenly on a level plane. The holding game plans have metallic strips which clasp the test example with the assistance of four knurling nuts. There is an emery material of indicated assignment might be mounted on the level stage underneath the test example.

Fabric Crockmeter

Fabric Crockmeter

In order to determine the colorfastness of dyed or printed textiles or leather, this test is used for the determination ofcolor fastness against rubbing, either under dry or under wet conditions.

PH Testers

PH Testers

Approx. Rs 7,800 / Unit


Specifications:

Taber Abrasion Tester

Taber Abrasion Tester

Approx. Rs 1.16 Lakh / Piece


Utilizing our times of understanding and with the help of our persistent group of experts, we are instrumental in giving a quality guaranteed collection of Taber Abrasion Tester.

Zip Abrasion Tester

Zip Abrasion Tester

Approx. Rs 62,200 / Piece


We manufacture the Zip Abrasion Tester under load conditions.

Air Permeability Tester

Air Permeability Tester

Approx. Rs 98,400 / Unit


The “ASIAN” Air Permeability Tester for textiles is used for air permeability testing of the fabrics. Digital and analog models are available. This system consists of an arrangement for holding the test specimens between two flat faces so as to expose a known area to the flow of air through it, a vacuum system to draw air through the exposed area of the test specimens. There is an arrangement to measure the volume of air flowing through the test specimen, and arrangement to measure the pressure drop between the faces of the test specimen. The test specimen is held between two round-shaped grips. The grips are lined with the rubber gasket to avoid the leakage of air through the edges. The two grips can be held the test specimens with the help of a hand operated screw mechanism. The vacuum needed to draw the air through the test specimens is created with the vacuum pump supplied with the instrument. The vacuum pressure is measured by the digital manometer (or manometer tube) in terms of mm of water level & airflow is measured by the Rotameters attached with the instrument. The equipment is metallic paint & bright chrome plating finish for corrosion resistant finishing.

Conditioning Chamber

Conditioning Chamber

Approx. Rs 69,600 / Unit


Any product and material show different properties at different environment. So for checking the properties of any material and product a Standard Temperature & humidity required for that particular product. The ASIAN Conditioning Chamber made of cubical shape, the inner body of the chamber made of stainless steel, there is a stainless steel water tank at the bottom of the chamber, an immersed heater is fitted to the tank for making humidity. There is two wire mesh tray are also fitted to the chamber, the tray is removable, the test specimen are held by the trays. There is a hinged door on the front of it. The outer body is made of mild steel duly powder coated to give it a corrosion resistant long life. There is a control panel on which digital humidity controller, a digital temperature, and switches for cooling, heating, humidity and mains are mounted. The cooling is done by compressor and heating is done by heaters. The temperature sensor and humidity sensor are fitted within the chamber.

Drape Meter

Drape Meter

Approx. Rs 26,000 / Unit


The ASIAN Drape Meter consists of a circular specimen support, an electric lamp to give off light, and an exposing and developing arrangement using light sensitive ammonia paper to determined the area covered by the shadow of the test specimen, and an electric lamp to expose the ammonia paper to determine the area covered by the shadow of the test specimen. The circular specimen support is made out cast aluminum and is fixed over a clear acrylic sheet. The sheet is hinged at one end and can be lifted for placing the ammonia paper for exposure. The paper is kept below the acrylic sheet on a resilient surface so that it is in close contact with the sheet when it is horizontal. The specimen holding and paper exposing arrangement are kept inside a sheet metal exposing chamber. The electric lamp is fitted at the upper end of the chamber so that light rays coming from it are intercepted by the test specimen. The rays which are not intercepted fall on the paper and expose it, thus giving a demarcation between exposed and unexposed areas. The chamber has a close fittings door. It has ventilation holes near its bottom and top for keeping it cool. An ammonia vapor developing chamber in which the exposed paper is kept for developing is provided below the exposing chamber. This chamber has a close fitting door and an arrangement to keep ammonium hydroxide to create a suitable atmosphere for developing the print. The test specimen is kept over a welded wire mesh platform to ensure a uniform developing. The outside of the apparatus is finished in dark admiralty gray synthetic enamel to give it a corrosion resistant finish. A metal template of 250 mm diameter have a central hole for marking and cutting the test specimens, a specimen pressing a disc, one hundred sheets of ammonia process paper, and one bottle of ammonium hydroxide are supplied as standard accessories.

Specifications:

Launderometer

Launderometer

Approx. Rs 95,000 / Unit


The “ASIAN” Launderometer consists of a digitally controlled, electrically heated double walled water bath. The inside walls of the bath are made of Al Stainless steel the outside walls are made of mild CRCA sheet duly enameled. The bath is heated by means of heaters. The temperature controller controls the temperature of the water inside the bath. The temperature is indicated on a digital indicator. The bath has a double walled hinged lit made of stainless steel sheet. The jars, in which the test solution and specimens are kept during the test, are made from stainless steel. Moreover, they are provided with rubber seals for watertight closing. They are held in a stainless steel rotor assembly mounted on a stainless steel shaft at the center of the bath and rotating about a horizontal axis with the help of an electric motor and worm reduction gear box.A clockwise time is also provided to stop the motor after any pre-determined time. The apparatus is fabricated on an iron frame and is completely enclosed on all four sides with mild sheet duly enameled in dark gray hammer tone painting. The top of the apparatus is covered with stainless steel sheet. One hundred stainless steel balls of 6mm diameter are supplied with the apparatus as a standard accessory for providing beating action during the washing operation, extra steel balls and standard gray scales are available as optional accessory.A built-in preheating bath for pre-heating the test solution is also offered as an optional accessory, this bath is mounted in the same form with provision to keep the jars in place. This bath also has double walled construction, with the inner chamber made of aluminum sheet, the outer chamber made of mild steel sheet, and mineral wool insulation between the town walls. The bath is heated the help of an electric immersion heater and its temperature controlled by a capillary type thermostat. These baths also have a double walled tip of stainless steel sheet.

Pull Testers

Pull Testers

Approx. Rs 86,400 / Piece


Specifications:

Round Cutter

Round Cutter

Approx. Rs 6,240 / Unit


The “ASIAN” Round Cutter is used for the accurate cutting of fabrics, paper, flooring etc. The system is made of the aluminum body for light weight. It has for imported blades. It has a lock which is used when the cutter is not used. The rubber pad is an optional accessory. The instrument is finished in bright chrome plating and dark gray metallic paint.

Specifications:

Snap Pull Out Tester

Snap Pull Out Tester

Approx. Rs 86,400 / Unit


Snap Pull Out Tester is used to determine the holding or breaking strength of prong-ring attached snap fasteners on the garments. The testing equipment comprises of an upper Snap-Clamp, a Lower Fabric Clamp & a Force Gauge mounted on a stand. The component to be tested is gripped by the Upper Snap Clamp and the garment is fixed to the Lower Fabric Clamp. The top flywheel is turned with a specific force. The recording instrument displays the holding strength or the breaking strength of the snap component attached.
Our snap pulls out tester are also used in paper industry for Elmendorf Tearing Strength. This test determines the average force required to propagate a single rip tongue-type tear starting from a cut in paper, cardboard, plastics, non-woven and woven fabrics, with proper configuration.

Features:

We are also offering Pull Out Test Apparatus to our clients.

Test Cabinets

Test Cabinets

Approx. Rs 69,600 / Unit


We are the manufacturer of the different type of Test Cabinets

Thickness Gauge

Thickness Gauge
  • Thickness Gauge
  • Thickness Gauge

Approx. Rs 21,600 / Unit


The “ASIAN” Thickness Gauge for fabric is used for the thickness measurement of the fabric, paper, rubber, plastic, flooring, etc. Analog and digital models are available. The systems consist of a dial micrometer fitted on a digital micrometer fitted on a rigid metallic frame. The micrometer has a flat circular indenter, which exerts the specified pressure on the fabric sample whose thickness is being measured through a dead weight. The fabric sample is kept on an anvil, which is in form of a flat circular platform. The axis of the indenter and the anvil coincide and are the same as the axis of movement of the indenter. The indenter can be raised and lowered gently onto the fabric sample with the help of a lifting lever.

Specification:

Zip Endurance Tester

Zip Endurance Tester

Approx. Rs 90,960 / Unit


We are offering Zip Endurance Tester to our clients.

Specifications:

X
Provide Us More Details
Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for Fabric Testing Equipment ?

    country-ico

    We will contact you soon !

    Aslam Islam

    (CEO)

    Asian Test Equipments

    Mussoorie Gulawathi Road, Ghaziabad, Uttar Pradesh, India

    More Categories

    View All Categories »
    Send SMS
    Contact Us